|
CBL Digital Adapter
(CBL-P) 5,60 CHF
|
 |
|
|
CBL Dual Photogate Adapter
(CBL-2P) 32,10 CHF
|
|
|
|
Digital Protoboard Connector
This is an adaptor used to interface the Vernier BTD digital sensors to the NI ELVIS prototyping board. (BTD-ELV) 18,00 CHF
|
|
|
|
Analog Protoboard Connector
This is an adaptor used to interface the Vernier BTA analog sensors to the NI ELVIS prototyping board. (BTA-ELV) 18,00 CHF
|
|
|
|
DIN Sensor to BTA Input Adapter
(DIN-BTA) 8,90 CHF
|
|
|
|
Motion Detector to BTD Input Adapter
CBL Adapter for ULI Motion Detector (CBL-RJ11) 8,90 CHF
|
|
|
|
Radiation Monitor to BTD Input Adapter
(RAD-BTD) 8,90 CHF
|
|
|
|
Rotary Motion Sensor to BTD Input Adapte
(ROT-BTD) 8,90 CHF
|
|
|
|
Photogate to BTD Input Adapter
(PG-BTD) 8,90 CHF
|
|
|
|
Homemade Photogate to BTD Input Adapter
(HMP-BTD) 17,05 CHF
|
|
|
|
Direct Connect Temperature Probe
(DCT-DIN) 53,05 CHF
|
|
|
|
BT Adapter to Older Interface
(BTA-DIN) 9,50 CHF
|
|
|
|
LabPro, SBI to PC Serial Cable
(CBS-IBM) 9,50 CHF
|
|
|
|
LabPro, SBI to Mac Serial Cable
(CBS-MAC) 9,50 CHF
|
|
|
|
LabPro to USB Cable (Mac or PC)
Das ist ein Standard 1 Meter USB Kabel für die Verbindung von LabPro zum Computer. (CB-USB) 7,90 CHF
|
|
|
|
LabPro Analog Cable
This cable has bare wire on one end and a male BTA connector on the other end. This cable can be used to connect your own sensors to our interfaces. The cable is approximately 5 feet long. (CB-BTA) 8,90 CHF
|
|
|
|
LabPro Digital Cable
This cable has bare wire on one end and a male BTD connector on the other end. It can be used to replace the cable on a BTD digital sensor by splicing it in with an existing cable. The cable is approximately 3 feet long. (CB-BTD) 8,90 CHF
|
|
|
|
Go! Motion to Calculator Cable
(GM-CALC) 14,30 CHF
|
|
|
|
|
|
|
|
|
