|
TETRIX Resource Set
Add this resource set to your TETRIX™ by Pitsco collection and build bigger and more complex robots and complete more challenging engineering projects. This set includes 40 metal building elements and comes complete with a convenient storage bin. 297,00 CHF
|
 |
|
|
TETRIX™ Robotic Base Set
Take your robot to the next level with the unlimited possibilities of TETRIX™, a complete design system for students who are serious about robotics. Featuring heavy-duty, aircraft-grade aluminum elements for construction of robotic components, TETRIX provides the ideal platform for flexible and creative robot design and building. Whether students want to build a basic square chassis robot base with a remote control or incorporate other electronics (not included) to design a highly specific autonomous robot, this system is unlimited. 510,00 CHF
|
|
|
|
TETRIX™ DC Motor Speed Controller
Get control of your DC motors – this controller plugs into your robot’s radio system to enable you to control the speed and direction of two motors. 115,00 CHF
|
|
|
|
TETRIX™ Hex Keys
This set comes with all four sizes of Hex Keys needed for TETRIX™ hex pieces. Includes one each of 7/64", 3/32", 1/16", and 5/64" keys. 2,00 CHF
|
|
|
|
Multi-Nut Plyers
Designed to hold nuts while bolts are tightened. The long, narrow neck reaches into tight places. 39,00 CHF
|
|
|
|
TETRIX™ Hard Point Connectors
The Hard Point Connector takes LEGO® MINDSTORMS® Education to a whole new level by allowing LEGO Technic elements to be connected to the revolutionary new metal building system, TETRIX™ by Pitsco! 22,00 CHF
|
|
|
|
TETRIX™ Motor Encoder Pack
When installed on the TETRIX™ DC Drive Motor, the TETRIX Motor Encoder Pack, along with the HiTechnic DC Motor Controller interface, enables your robot to move a fixed distance, rotate to a specific position, move at a constant speed, reset encoders, and read coders using the LEGO® MINDSTORMS® Education NXT Software. 131,00 CHF
|
|
|
|
HiTechnic DC Motor Controller
The HiTechnic DC Motor Controller for TETRIX™ connects to an NXT sensor port and will enable you to control powerful DC gear motors for use with TETRIX robots. The controller has two H-bridge outputs to control the speed and direction of two DC gear motors and is designed to connect to the TETRIX hole pattern. 119,00 CHF
|
|
|
|
HiTechnic Servo Controller
The HiTechnic Servo Motor Controller for TETRIX™ will enable you to control up to six R/C-type servo motors for use with TETRIX robots, enabling you to add proportional positioning to your robotic creations. 131,00 CHF
|
|
|
|
12V Rechargeable NiMh Battery Pack
Use this 10-cell, 12-volt, 3,000 mAh, NiMH pack with built-in 20-amp replaceable fuse for safety to power the HiTechnic DC Motor and Servo Controllers. 70,00 CHF
|
|
|
|
|
|
|
|
|
NiMh Battery Pack Charger
Use this charger to charge our 12V Battery Pack (739057). This NiMH Charger auto-detects battery ... 70,00 CHF
|
|
|
|
Pivot Bearing
Replacement pivot bearing for the Servo Joint Pivot Bracket. 5,00 CHF
|
|
|
|
Button Head Cap Screws
These 6-32 screws feature a low-profile head – great for areas where moving parts are close to the screw heads. Requires hex keys, sold sepatately, to tighten and loosen the screws. 16,00 CHF
|
|
|
|
TETRIX Chain with Links
TETRIX™ Chain with Links is made to work with all ratios of TETRIX sprockets. The chain pack includes five feet of 0.250" steel chain and four master connecting links. 24,00 CHF
|
|
|
|
TETRIX Chain Breaker Tool
With the Chain Breaker, quickly and easily change the length of 0.250" TETRIX Chain with Links. 26,00 CHF
|
|
|
|
Kabelbinder/ Cable Ties
500 Stuck verschiedene Grösse. 31,00 CHF
|
|
|
|
Hook-and-Loop Fastener
Great for a multitude of applications! One 10-foot strip of each material. 190 mm wide. 38,00 CHF
|
|
|
|
HiTec Servo mit Scheibe
Servo HS-475 Standart Deluxe 38,00 CHF
|
|
|
|
HiTech Servo Scheibe
Forget those plastic servo horns! This heavy-duty aluminum servo horn lends extra strength to your servo applications. 12,00 CHF
|
|
|
|
TETRIX™ Single-Servo Motor Brackets
Heavy-duty aluminum brackets each hold one servo in place. 17,00 CHF
|
|
|
|
TETRIX 3" Omni Wheel 2 Pack
65,00 CHF
|
|
|
|
|
|
|
